Air distribution SD, VS, JNZ, ANZ, SP, etc.

Air distributors for displacement ventilation are designed for air conditioning of both industrial and sports facilities, as well as rooms with high comfort requirements. They are used in rooms where there is an excess of heat or heavy pollution. They are used in ventilation systems where a "fresh air lake" is created in the working area with the help of supply air. The air is heated from heat sources in the room and rises to the ceiling, from where it is removed from the room. Thus, the necessary temperature and atmosphere are achieved in the room without a draft.
Models: SD-1, SD-2, SD-3, SD-6, etc.

---

Nozzle air distributors are designed to distribute indoor air over a considerable distance due to the range of the air supply jet at a low noise level. They are used to supply cooled or heated air. They are made of anodized aluminum and painted by powder spraying in any RAL color at the request of the customer. Nozzle air distributors can consist of one nozzle or several combined into blocks, which significantly increases the range of the jet.
Models: VS-1, VS-4, VS-5, etc.

---

Overpressure valves are used to equalize the pressure between adjacent rooms and to automatically stop the supply or removal of air. Control valves are designed to regulate air flow in air ducts and individual devices of ventilation and air conditioning systems.
Models: JNZ-6, ANZ-3, ANZ-4, JNZ-6W, RZ-1, RZ-2, RZ-3, RZ-1/G, RZ-7, etc.

---

Throttle valves, shut-off and check valves, air flow regulators are designed to regulate air flow, cut-off and air supply, air supply in a certain direction. They are installed in air ducts.

Models: DL, DL-2, ZL-2, RSK, MRP-1, MRP-2, MRP-3, MRP-4, ERP-1, ERP-2N, ERP-3N, ERT-1, ERT-3, etc.

---

Protective louvered grilles are built into the exhaust or supply openings of low-pressure ventilation and air conditioning systems, installed on the facades of buildings and also serve to protect against external influences: rain, birds, large insects, etc.
Models: AZR-3, AZR-4, JZR-6, OZR-1, etc.

---

Ventilation shafts are used for intake and removal of air in ventilation and air conditioning systems. A variety of designs can be made from different materials according to customer requirements.
Models: SP, etc.

---

• Air distributors for displacement ventilation. Technical specifications.
• Nozzle air distributors. Technical specifications.
• Overpressure valves. Technical specifications.
• Control valves. Technical specifications.
• Throttle valves, shut-off and check valves. Technical specifications.
• Air flow regulators with manual control. Technical specifications.
• Protective louvered grilles. Technical specifications.
• Ventilation shafts. Technical specifications.

---